Gearbest Creality3D Ender – 3 pro Review and Coupon
Gearbest Creality3D Ender – 3 pro Review and Coupon Black – US plug, EU plug
Creality3D Ender – 3 pro’s Review
Better mechanical properties. The Ender 3 Pro has a 40 × 40 aluminum extrusion for its base on the Y axis to make it more robust. This would also help increase the overall stability of the printing surface. In addition, it comes with better bearings, which reduces friction, helps reduce noise levels, provides more rigidity and provides better dimensional stability.
In a press release, Creality said they traded their extruder for an “MK-10” version. According to the company, this business should “greatly reduce the risk of clogging and irregular extrusion.” The final feature that distinguishes Ender 3 Pro from Ender 3 is the “C-MAG” magnetic print bed that comes equipped. The sheet is flexible and removable, which means you can easily remove the print from the printing plate. According to Reality, this particular type of textured surface sticks to all kinds of filaments better than any traditional method like glue, sprays or tape.
For a 3D printer that costs around $ 250, it was a surprise – and enjoyable – to see the added accessories such as the new nozzle cleaner and the nozzle that comes with the package. Once you complete the unboxing, you can start with the planned assembly process.
Although it is said that the Creality Ender 3 Pro is a pre-assembled 3D printing kit, the truth is you will need to do a good bit of tweaking before you have everything working fine for you. Unlike the CR-10 from Creality, which can be classified as pre-assembled, the 3 Pro requires more time and effort to be assembled. You’d better call the Creality Ender 3 Pro from a semi-assembled machine instead of a pre-assembled one. The entire assembly process is documented in a small flyer included in the printer package. The process is written in 12 steps. Although it seems easy to follow, some of the levels do not have enough details or explanations, which made compilation time longer than it should have initially. If you take into account the assembly time and bed leveling, the whole process should take a novice user in about 1 to 2 hours to complete. We divided the assembly process into the following sections to make things easier. The first section is the assembly of the structure, followed by the assembly of the X-axis. This is followed by the installation of the belt, assembly of the machine and finally spinning. The first step is to assemble the frame using the pair of 40 × 40 aluminum extrusion parts. These are attached to the frame using two pairs of screws on each side. One tip that can make this easy for you is to turn the printing base up front. The printer arrives with pre-punched holes in the bottom where you can mount the Ender 3 Pro aluminum extrusions.
The next step is to connect the LCD screen and the power supply box to the base. This is a simple act of performing and one that the instruction manual explained well enough. From here, things get a bit more complicated, especially if this is the first time you mount a 3D printer. After adding the power supply and the LCD to the base, the next step is to install the Z motor and the Z limit switch on the left side of the frame. The limit switch Z must – and this is important – be mounted precisely 32 mm from the base of the base next to the vertical beam. If you set the limit switch too high or too low, it will eventually disrupt the calibration process, which is why you need to pay close attention to what you are doing. You may want to pull a ruler for this aspect of the assembly, as you need to be as accurate as possible if you want a successful meeting.
The next step is to connect the power supply box and the LCD screen to the base. This is a simple act of execution and one that the instruction manual explained sufficientlyFrom here, things get trickier a bit, even more so if this is the first time you assemble a 3D printer. After adding the power supply and the LCD to the base, the next step is to install the Z motor and the Z limit switch on the left side of the frame. The limit switch Z must – and this is important – be mounted precisely 32 mm from the base of the base next to the vertical beam. If you set the limit switch too high or too low, it will eventually interrupt the calibration process, which is why you need to pay close attention to what you are doing. You may want to pull a ruler for this aspect of the assembly because you need to be as accurate as possible if you want a successful meeting.
One of the effects of the improvements in Ender 3 Pro is that it will cost more than Ender 3. However, are general changes worth the money? Probably yes. Although a magnetic bed is not needed if you want great results in your print, it’s a good idea to have it. The same can be said for the improved extruder, not really required for most results, but rather for exceptional results. So if you have money for these improvements and still want to take advantage of all that Ender 3 has to offer, you should buy Ender 3 Pro. If you are still looking for a reason, the improved Y axis should be. The improvement provides a more consistent and better quality impression compared to Creality Ender 3.
|Printing area:||(4.5 / 5)|
|Design:||(4.5 / 5)|
|Specifications:||(4.0 / 5)|
|Performance:||(5.0 / 5)|
|Price:||(4.0 / 5)|
– Oversized nuts design
– Humanized design
– Stable power supply
– Simple leveling method
– Easy to remove
Creality3D Ender – 3 pro’s Specs
Model: Ender – 3 pro
Dimensions and Weight
Product size (length x width x height): 17.32 x 17.32 x 18.31 inches / 44.000 x 44.000 x 46.500 cm
Package size (length x width x height): 23.43 x 19.49 x 6.50 inches / 59.500 x 49.500 x 16.500 cm
Product weight: 6.9000 kg
Package weight: 8.9000 kg
1x 3D Printer + 1x Plier + 1x Nozzle + 2x Pneumatic Fitting + 1x SD Card + 1x Cable Tie + 1x Blade + 5x Allen Key + 1x Needle + 2x Wrench + 1x Rack + 2x PTFE Tube + 1x Screwdriver